Deep Clean Cold Plunge

How To Deep Clean Your Cold Life Plunge 

Cleaning your Cold Life plunge requires gentle care to avoid damaging the finish. Here's a step-by-step guide to help you wash it effectively:

Step 1: Prepare Your Supplies

• Mild dish soap or a gentle cleaner
• Soft sponge or microfiber cloth
• Water hose or bucket of water
• Soft-bristled brush (optional)
• Soft towels for drying

Step 2: Assess the Condition

• Before cleaning, assess the condition of the powder-coated surface. Note any areas with visible dirt, grime, or stains that need extra attention.

Step 3: Rinse the Cold Plunge

• Begin by rinsing the entire surface of the cold plunge with water. This helps to remove any loose debris and prepare the surface for cleaning.

Step 4: Prepare the Cleaning Solution

• Mix a small amount of mild dish soap or a gentle cleaner with water in a bucket. Avoid using harsh chemicals or abrasive cleaners that could damage the powder-coated finish.

Step 5: Wash the Surface

• Dip a soft sponge or microfiber cloth into the cleaning solution and gently wash the powder-coated surface of the cold plunge. Work in small sections, applying light pressure to remove dirt and stains.

Step 6: Pay Attention to Stubborn Stains

• For stubborn stains or areas with built-up grime, you may need to use a soft-bristled brush. Be cautious not to scrub too vigorously, as this could scratch the powder-coated finish.

Step 7: Rinse Thoroughly

• After washing, rinse the entire surface of the cold plunge with clean water to remove any remaining soap residue. Ensure that all cleaning solution is thoroughly rinsed away to prevent streaks or spots.

Step 8: Dry the Surface

• Use soft towels to dry the powder-coated surface completely. This helps prevent water spots and maintains the finish of the cold plunge.

Step 9: Inspect for Remaining Stains

• Once dry, inspect the surface of the cold plunge for any remaining stains or areas that may need further cleaning. Spot clean as necessary using the same gentle techniques.

Step 10: Regular Maintenance

• To keep your plunge looking its best, consider implementing a regular maintenance schedule. This may include routine washing with mild soap and water, as well as prompt spot cleaning of any spills or stains.

By following these steps and using gentle cleaning techniques, you can effectively wash your powder-coated cold plunge without damaging the finish.

Removing Calcium or Build-Up in Your Drains

Depending on the state that you're in and your local water source, calcium and build up in the drains can develop.  Removing calcium buildup from drains can be a straightforward process with the right tools and techniques. Here's a step-by-step guide to help you get it done effectively:

Step 1: Gather Your Supplies

• Rubber gloves
• Scrubbing brush or sponge 
• White vinegar or a commercial descaling solution
• Baking soda
• Water hose or bucket

Step 2: Drain the Cold Plunge

• Start by draining the cold plunge completely. You can do this by opening the drain valve.

Step 3: Remove Debris

• Once the water has drained, remove any debris or large particles from the bottom of the cold plunge using a brush or sponge.

Step 4: Create a Cleaning Solution

• Mix equal parts white vinegar and hot water in a bucket. Alternatively, you can use a commercial descaling solution following the manufacturer's instructions.

Step 5: Clean the Drains

• Pour the cleaning solution into the (3) drains of your cold plunge. Let the solution sit for 15-30 minutes to loosen any of the buildup and deposits.

Step 6: Flush with Water

• Finally, flush the drains with hot water to remove any remaining residue and ensure they are clear and functioning properly.

Step 7: Repeat if Necessary

• If there are still areas of stubborn calcium buildup,, you may need to repeat the cleaning process or use a more powerful descaling solution.

Step 8: Regular Maintenance

• To prevent future buildup, consider implementing a regular maintenance schedule for cleaning your cold plunge and treating the drains with a descaling solution periodically.

By following these steps, you can effectively clean your cold plunge and remove calcium buildup from the drains, ensuring it remains in optimal condition for your use.